at a session on the umbrella concept of “mixed reality” (abbreviated XR) here Thursday, attendees had some questions for the panel’s VR/AR/XR evangelists: Can these tools help students learn? Can institutions with limited budgets pull off ambitious projects? Can skeptical faculty members be convinced to experiment with unfamiliar technology?
Yale has landed on a “hub model” for project development — instructors propose projects and partner with students with technological capabilities to tap into a centralized pool of equipment and funding. (My note: this is what I suggest in my Chapter 2 of Arnheim, Eliot & Rose (2012) Lib Guides)
Several panelists said they had already been getting started on mixed reality initiatives prior to the infusion of support from Educause and HP, which helped them settle on a direction
While 3-D printing might seem to lend itself more naturally to the hard sciences, Yale’s humanities departments have cottoned to the technology as a portal to answering tough philosophical questions.
institutions would be better served forgoing an early investment in hardware and instead gravitating toward free online products like Unity, Organon and You by Sharecare, all of which allow users to create 3-D experiences from their desktop computers.
XR technologies encompassing 3D simulations, modeling, and production.
This project sought to identify
current innovative uses of these 3D technologies,
how these uses are currently impacting teaching and learning, and
what this information can tell us about possible future uses for these technologies in higher education.
p. 5 Extended reality (XR) technologies, which encompass virtual reality (VR) and augmented reality (AR), are already having a dramatic impact on pedagogy in higher education. XR is a general term that covers a wide range of technologies along a continuum, with the real world at one end and fully immersive simulations at the other.
p. 6The Campus of the Future project was an exploratory evaluation of 3D technologies for instruction and research in higher education: VR, AR, 3D scanning, and 3D printing. The project sought to identify interesting and novel uses of 3D technology
p. 7 HP would provide the hardware, and EDUCAUSE would provide the methodological expertise to conduct an evaluation research project investigating the potential uses of 3D technologies in higher education learning and research.
The institutions that participated in the Campus of the Future project were selected because they were already on the cutting edge of integrating 3D technology into pedagogy. These institutions were therefore not representative, nor were they intended to be representative, of the state of higher education in the United States. These institutions were selected precisely because they already had a set of use cases for 3D technology available for study
p. 9 At some institutions, the group participating in the project was an academic unit (e.g., the Newhouse School of Communications at Syracuse University; the Graduate School of Education at Harvard University). At these institutions, the 3D technology provided by HP was deployed for use more or less exclusively by students and faculty affiliated with the particular academic unit.
p. 10 definitions
there is not universal agreement on the definitions of these
terms or on the scope of these technologies. Also, all of these technologies
currently exist in an active marketplace and, as in many rapidly changing markets, there is a tendency for companies to invent neologisms around 3D technology.
A 3D scanner is not a single device but rather a combination of hardware and
software. There are generally two pieces of hardware: a laser scanner and a digital
camera. The laser scanner bounces laser beams off the surface of an object to
determine its shape and contours.
p. 11 definitions
Virtual reality means that the wearer is completely immersed in a computer
simulation. Several types of VR headsets are currently available, but all involve
a lightweight helmet with a display in front of the eyes (see figure 2). In some
cases, this display may simply be a smartphone (e.g., Google Cardboard); in other
cases, two displays—one for each eye—are integrated into the headset (e.g., HTC
Vive). Most commercially available VR rigs also include handheld controllers
that enable the user to interact with the simulation by moving the controllers
in space and clicking on finger triggers or buttons.
p. 12 definitions
Augmented reality provides an “overlay” of some type over the real world through
the use of a headset or even a smartphone.
In an active technology marketplace, there is a tendency for new terms to be
invented rapidly and for existing terms to be used loosely. This is currently
happening in the VR and AR market space. The HP VR rig and the HTC Vive
unit are marketed as being immersive, meaning that the user is fully immersed in
a simulation—virtual reality. Many currently available AR headsets, however, are
marketed not as AR but rather as MR (mixed reality). These MR headsets have a
display in front of the eyes as well as a pair of front-mounted cameras; they are
therefore capable of supporting both VR and AR functionality.
p. 13 Implementation
Technical difficulties.
Technical issues can generally be divided into two broad categories: hardware
problems and software problems. There is, of course, a common third category:
human error.
p. 15 the technology learning curve
The well-known diffusion of innovations theoretical framework articulates five
adopter categories: innovators, early adopters, early majority, late majority, and
laggards. Everett M. Rogers, Diffusion of Innovations, 5th ed. (New York: Simon and Schuster, 2003).
It is also likely that staff in the campus IT unit or center for teaching and learning already know who (at least some of) these individuals are, since such faculty members are likely to already have had contact with these campus units.
Students may of course also be innovators and early adopters, and in fact
several participating institutions found that some of the most creative uses of 3D technology arose from student projects
p. 30 Zeynep Tufekci, in her book Twitter and Tear Gas
definition: There is no necessary distinction between AR and VR; indeed, much research
on the subject is based on a conception of a “virtuality continuum” from entirely
real to entirely virtual, where AR lies somewhere between those ends of the
spectrum. Paul Milgram and Fumio Kishino, “A Taxonomy of Mixed Reality Visual Displays,” IEICE Transactions on Information Systems, vol. E77-D, no. 12 (1994); Steve Mann, “Through the Glass, Lightly,” IEEE Technology and Society Magazine 31, no. 3 (2012): 10–14.
For the future of 3D technology in higher education to be realized, that
technology must become as much a part of higher education as any technology:
the learning management system (LMS), the projector, the classroom. New
technologies and practices generally enter institutions of higher education as
initiatives. Several active learning classroom initiatives are currently under
way,36 for example, as well as a multi-institution open educational resources
(OER) degree initiative.37
p. 32 Storytelling
Some scholars have argued that all human communication
is based on storytelling;41 certainly advertisers have long recognized that
storytelling makes for effective persuasion,42 and a growing body of research
shows that narrative is effective for teaching even topics that are not generally
thought of as having a natural story, for example, in the sciences.43
p. 33 accessibility
The experience of Gallaudet University highlights one of the most important
areas for development in 3D technology: accessibility for users with disabilities.
p. 34 instructional design
For that to be the case, 3D technologies must be incorporated into the
instructional design process for building and redesigning courses. And for that
to be the case, it is necessary for faculty and instructional designers to be familiar
with the capabilities of 3D technologies. And for that to be the case, it may not be necessary but would certainly be helpful for instructional designers to collaborate closely with the staff in campus IT units who support and maintain this hardware.
Every institution of higher education has a slightly different organizational structure, of course, but these two campus units are often siloed. This siloing may lead to considerable friction in conducting the most basic organizational tasks, such as setting up meetings and apportioning responsibilities for shared tasks. Nevertheless, IT units and centers for teaching and learning are almost compelled to collaborate in order to support faculty who want to integrate 3D technology into their teaching. It is necessary to bring the instructional design expertise of a center for teaching and learning to bear on integrating 3D technology into an instructor’s teaching (My note: and where does this place SCSU?) Therefore, one of the most critical areas in which IT units and centers for teaching and learning can collaborate is in assisting instructors to develop this integration and to develop learning objects that use 3D technology. p. 35 For 3D technology to really gain traction in higher education, it will need to be easier for instructors to deploy without such a large support team.
p. 35 Sites such as Thingiverse, Sketchfab, and Google Poly are libraries of freely
available, user-created 3D models.
ClassVR is a tool that enables the simultaneous delivery of a simulation to
multiple headsets, though the simulation itself may still be single-user.
p. 37 data management:
An institutional repository is a collection of an institution’s intellectual output, often consisting of preprint journal articles and conference papers and the data sets behind them.49 An institutional repository is often maintained by either the library or a partnership between the library and the campus IT unit. An institutional repository therefore has the advantage of the long-term curatorial approach of librarianship combined with the systematic backup management of the IT unit. (My note: leaves me wonder where does this put SCSU)
Sharing data sets is critical for collaboration and increasingly the default for
scholarship. Data is as much a product of scholarship as publications, and there
is a growing sentiment among scholars that it should therefore be made public.50
“Shifts in students’ learning style will prompt a shift to active construction of knowledge through mediated immersion.”-Chris Dede
The theory of constructivist-based learning, according to Dr. Seymour Papert, “is grounded in the idea that people learn by actively constructing new knowledge, rather than having information ‘poured’ into their heads.”
Moreover, constructionism asserts that people learn with particular effectiveness when they are engaged in constructing personally meaningful artifacts (such as computer programs, animations, 3D modeling, creating spatial environments in virtual reality or building robots).”
Technologies like virtual reality, especially for Gen Z students’, provides avenues that allow them to engage in a social, collaborative, and active learning environment.
Virtual reality, especially when combined with powerful storytelling, allows the student to participate in the story, develop empathy to experiences outside their current realm of understanding and allows them to be fully immersed in their own exploration and learning.
the International Society for Technology in Education to publish a book, titled Learning Transported: Augmented, Virtual and Mixed Reality for All Classrooms, to offer practical insights, lesson plans, and classroom examples so educators can make the most of these experiential worlds.
Definition
Augmented reality superimposes a digital layer on the world around us, often activated by scanning a trigger image or via GPS (think Pokemon Go!). Virtual reality takes users away from the real world, fully immersing students in a digital experience that replaces reality. Mixed reality takes augmented a step further by allowing the digital and real worlds to interact and the digital components to change based on the user’s environment.
DEVICES: iOS, Android, COURSE: English Language Arts, Speaking and Listening, GRADES: K-1
Augmented and Virtual Reality with EON
DEVICES: iOS, Android, COURSE: Earth and Space Science, GRADE: 4, 45 minutes
Scavenger Hunting as a Classroom Activity
The app offers teachers a unique way to create a scavenger hunt by designing AR messages and leaving them in specific places for students to “discover.”
Waypoint App
The Waypoint App also allows for creation of educational scavenger hunts using augmented reality. Educators can easily add questions that address lesson objectives, set specific locations where the questions are hidden, and then have students hunt for questions by following the map. The hunt is easily shared with students on a variety of platforms, including text messaging and email.
Breakout EDU
Breakout EDU has become a popular game in education. Driven by creativity, teamwork, and problem-solving, the game provides a fun learning experience as it challenges students to compete in solving puzzles. The game centers on a series of questions; each solved question unlocks the next part of the activity. Students work in groups, competing against other groups to open all the locks first.
College students’ perceptions of pleasure in learning – Designing gameful gamification in education
investigate behavioral and psychological metrics that could affect learner perceptions of technology
today’s learners spend extensive time and effort posting and commenting in social media and playing video games
Creating pleasurable learning experiences for learners can improve learner engagement.
uses game-design elements in non-gaming environments with the purpose of motivating users to behave in a certain direction (Deterding et al., 2011)
How can we facilitate the gamefulness of gamification?
Most gamified activities include three basic parts: “goal-focused activity, reward mechanisms, and progress tracking” (Glover, 2013, p. 2000).
gamification works similarly to the instructional methods in education – clear learning and teaching objectives, meaningful learning activities, and assessment methods that are aligned with the objectives
the design of seven game elements:
Storytelling: It provides the rules of the gamified activities. A good gamified activity should have a clear and simple storyboard to direct learners to achieve the goals. This game-design element works like the guidelines and directions of an instructional activity in class.
Levels: A gamified activity usually consists of different levels for learners to advance through. At each level, learners will face different challenges. These levels and challenges can be viewed as the specific learning objectives/competencies for learners to accomplish.
Points: Points pertain to the progress-tracking element because learners can gain points when they complete the quests.
Leaderboard: This element provides a reward mechanism that shows which learners are leading in the gamified activities. This element is very controversial when gamification is used in educational contexts because some empirical evidence shows that a leaderboard is effective only for users who are aggressive and hardcore players (Hamari, Koivisto, & Sarsa, 2014).
Badges: These serve as milestones to resemble the rewards that learners have achieved when they complete certain quests. This element works as the extrinsic motivation for learners (Kapp, 2012).
Feedback: A well-designed gamification interface should provide learners with timely feedback in order to help them to stay on the right track.
Progress: A progress-tracking bar should appear in the learner profile to remind learners of how many quests remain and how many quests they have completed.
Dominguez et al. (2013) suggested that gamification fosters high-order thinking, such as problem-solving skills, rather than factual knowledge. Critical thinking, which is commonly assessed in social science majors, is also a form of higher-order thinking.
Davis (1989) developed technology acceptance model (TAM) to help people understand how users perceive technologies. Pleasure, arousal, and dominance (PAD) emotional-state model that developed by Mehrabian (1995) is one of the fundamental design frameworks for scale development in understanding user perceptions of user-system interactions.
Van der Heijdedn (2004) asserted that pleasurable experiences encouraged users to use the system for a longer period of time Self-determination theory (Deci & Ryan, 1985) has been integrated into the design of gamification and addressed the balance between learners’ extrinsic and intrinsic motivation.
Ryan and Deci (2000) concluded that extrinsic rewards might suppress learners’ intrinsic motivation. Exploiting the playfulness and gamefulness in gamification, therefore, becomes extremely important, as it would employ the most effective approaches to engage learners.
Sweetser and Wyeth (2005) developed GameFlow as an evaluation model to measure player enjoyment in games
Fu, Su, and Yu (2009) adapted this scale to EGameFlow in order to measure college students’ enjoyment of e-learning games. EGameFlow is a multidimensional scale that consists of self-evaluated emotions.
Eppmann, Bekk, and Klein (2018) developed gameful experience scale (GAMEX) to measure gameful experiences for gamification contexts. one of the limitations of GAMEX to be used in education is that its effects on learning outcome has not been studied
the Big Five Model, which has been proposed as trait theory by McCrae & Costa (1989) and is widely accepted in the field, to measure the linkages between the game mechanics in gamification and the influences of different personality traits.
Storytelling in the subscale of Preferences for Instruction emphasizes the rules of the gamified learning environments, such as the syllabus of the course, the rubrics for the assignments, and the directions for tasks. Storytelling in the subscale of Preferences for Instructors’ Teaching Style focuses on the ways in which instructors present the content. For example, instructors could use multimedia resources to present their instructional materials. Storytelling in the subscale of Preferences for Learning Effectiveness emphasizes scaffolding materials for the learners, such as providing background information for newly introduced topics.
The effective use of badges would include three main elements: signifier, completion logic, and rewards (Hamari & Eranti, 2011). A useful badge needs clear goal-setting and prompt feedback. Therefore, badges correlate closely with the design of storytelling (rules) and feedback, which are the key game design elements in the subscale of Preferences for Instruction.
Students can use Google to search on their laptops or tablets in class when instructors introduce new concepts. By reading the reviews and viewing the numbers of “thumbs-up” (agreements by other users), students are able to select the best answers. Today’s learners also “tweet” on social media to share educational videos and news with their classmates and instructors. Well-designed gamified learning environments could increase pleasure in learning by allowing students to use familiar computing experiences in learning environments.
Overview of the programmatic standards for general and special education, how these standards are integrated in special education curriculum, and e-portfolio requirements for documenting acquisition of the above standards.
Gaming and Gamification.
why Gaming and Gamification? Vygotsky and ZPD (immersive storytelling is a form of creative play)
from: https://cpb-us-e1.wpmucdn.com/blog.stcloudstate.edu/dist/d/10/files/2015/03/Gaming-and-Gamification-in-academic-and-library-settings-final-draft-1digudu.pdf
play >>> games >>> serious games >>> Game Based learning >>>>+ Digital Game Based learning
“Games are type of cooperative learning. Games embody the essence of constructivism, which for students/gamers means constructing their own knowledge while they interact (learn cooperatively). Learning can happen without games, yet games accelerate the process. Games engage. Games, specifically digital ones, relate to the digital natives, those born after 1976 – 80, who are also known as Generation Y, or Millennials”
is it generational? Is it a fad? is it counter-pedagogical?
what is the difference between GBL (Game Based Learning) and DGBL (Digital GBL): share examples, opinions. Is one better / preferable then the other? Why?
Kahoot game (Yahoo): https://play.kahoot.it/#/k/1412b52c-da28-4507-b658-7dfeedf0864c
hands-on assignment (10 min): split in groups and discuss your experience with games; identify your preferable mode (e.g. GBL vs DGBL) and draft a short plan of transitioning your current curricula to a curricula incorporating games.
What is gamification? Why gamification, if we have games? “Gamification takes game elements (such as points, badges, leaderboards, competition, achievements) and applies them to a non – game setting. It has the potential to turn routine, mundane tasks into refreshing, motivating experiences ”
hands-on assignment (10 min): split in groups and use your electronic devices: smartphones, tablets, laptops to experience any of the following gamification tools:
Preliminary Plan for Monday, Sept 10, 5:45 PM to 8 PM
Introduction – who are the students in this class. About myself: http://web.stcloudstate.edu/pmiltenoff/faculty Contact info, “embedded” librarian idea – I am available to help during the semester with research and papers
#FakeNews is a very timely and controversial issue. in 2-3 min choose your best source on this issue. 1. Mind the prevalence of resources in the 21st century 2. Mind the necessity to evaluate a) the veracity of your courses b) the quality of your sources (the fact that they are “true” does not mean that they are the best). Be prepared to name your source and defend its quality.
How do you determine your sources? How do you decide the reliability of your sources? Are you sure you can distinguish “good” from “bad?”
Compare this entry https://en.wikipedia.org/wiki/List_of_fake_news_websites
to this entry: https://docs.google.com/document/d/10eA5-mCZLSS4MQY5QGb5ewC3VAL6pLkT53V_81ZyitM/preview to understand the scope
Do you know any fact checking sites? Can you identify spot sponsored content? Do you understand syndication? What do you understand under “media literacy,” “news literacy,” “information literacy.” https://blog.stcloudstate.edu/ims/2017/03/28/fake-news-resources/
Why do we need to explore the “fake news” phenomenon? Do you find it relevant to your professional development?
So, how do we do academic research? Let’s play another Kahoot: https://play.kahoot.it/#/k/5e09bb66-4d87-44a5-af21-c8f3d7ce23de
If you to structure this Kahoot, what are the questions, you will ask? What are the main steps in achieving successful research for your paper?
Research using social media
what is social media (examples). why is called SM? why is so popular? what makes it so popular?
use SM tools for your research and education:
– Determining your topic. How to?
Digg http://digg.com/, Reddit https://www.reddit.com/ , Quora https://www.quora.com
Facebook, Twitter – hashtags (class assignment 2-3 min to search)
LinkedIn Groups
YouTube and Slideshare (class assignment 2-3 min to search)
Flickr, Instagram, Pinterest for visual aids (like YouTube they are media repositories)
high school students now create infographics, BuzzFeed-like quizzes and even virtual reality (VR) experiences to illustrate how they can research, write and express their thoughts.
technology — using sites like CoSpaces Edu and content learning system Schoology (my note: the equivalnet of D2L at SCSU) — to engage and empower her students.
Thinklink, during a session called “Virtually Not an Essay: Technological Alternatives to a standard essay assignment.” (see this blog materials on ThingLink and like here: https://blog.stcloudstate.edu/ims?s=thinglink. The author made typo by calling the app “ThinKlink, instead of ThinGlink. Also, to use Thinglink’s Video 360 editor, the free account is not sufficient and the $125/month upgrade is needed. Not a good solution for education)
Jamie: I would love to discuss with you #infographics and #Thinglink for use in your courses and the Departmental course.
Digital literacy (DL): options, ideas, possibilities
the power of storytelling. Which allows brands to be more memorable and build more meaningful connections with the audience.
Every business website has an “About” page. Most businesses fill this page with boring stats and statements when they should be using it to tell their story.
According to a case study by HBR, making an emotional connection with your audience is much more important than customer satisfaction.
Getting your customers to share their own stories, also known as brand-driven storytelling, is a powerful approach that can increase your authority and brand awareness at the same time.
Open Discussion: VR in Education | Тема: Виртуалната реалност в образованието
Where | Университет Пловдив https://goo.gl/maps/bLBYXkp5S1S2 and online ( виртуално) When | Кога: 3. май, 2018, 15 часа | May 3, 2018, 3PM local time (Bulgaria) Who | Кой: преподаватели и суденти | faculty аnd students How | Как: използвайте “обратна връзка” за споделяне на вашите идеи | use the following hashtag for backchanneling #BGtechEd
Виртуална реалност в учебния процес – теория и практика- 1-1, 1/2 час продължителност Virtual reality in teaching and learning – theory and hands-on
Уточняване на понятията относно различните видове реалност: виртуална реалност, video 360 ; разширена реалност; смесена реалност. VR/AR/MR in education.
Подход и усвояване на различните видове реалност в образованието. Връзка между трите вида реалност в образованието и конструктивизма като теория на преподаването. Връзка между трите вида реалност в образованието и игровия подход и игрофикацията на образованието. Оценяване на обучението базирано на различните видове реалности.
When a student is brilliant on the street corner but falling asleep in class, something is wrong with the schooling system Ако учащ се е страхотен на ъгъла на улицата, но се проваля или заспива в клас, тогава нещо е грешно с учебната система https://blog.stcloudstate.edu/ims/2018/04/17/education-teched-frenemies/
Дискусия относно методиката на приложение в учебния процес
2 min video from the entrance of your University is viewable through Google Cardboard and your laptops. Study the video and seek answers to the following questions:
******https://youtu.be/VmOpsrVhEQE ********
– what are the advantages of Video 360 to all other known-to-you media formats?
кои са предимствата на Видео 360 в сравнение с всички други медийни формати, които познавате?
– what would you do better in terms the video footage?
какво бихте заснимали, което да подобри видео материала за преподавателски и учебни цели (например: както друго място бихте избрали)
– how is / can be this medium advantageous to implementing core learning / teaching techniques
как този медиен формат може да се използва за да се подобрят съществуващите условия за успешно преподаване и обучение
По избор – разговор с Марк Гил от Щатския университет Сейнт Клауд и демонстрация на виртуална реалност в учебния процес – 10-15 мин