at a session on the umbrella concept of “mixed reality” (abbreviated XR) here Thursday, attendees had some questions for the panel’s VR/AR/XR evangelists: Can these tools help students learn? Can institutions with limited budgets pull off ambitious projects? Can skeptical faculty members be convinced to experiment with unfamiliar technology?
Yale has landed on a “hub model” for project development — instructors propose projects and partner with students with technological capabilities to tap into a centralized pool of equipment and funding. (My note: this is what I suggest in my Chapter 2 of Arnheim, Eliot & Rose (2012) Lib Guides)
Several panelists said they had already been getting started on mixed reality initiatives prior to the infusion of support from Educause and HP, which helped them settle on a direction
While 3-D printing might seem to lend itself more naturally to the hard sciences, Yale’s humanities departments have cottoned to the technology as a portal to answering tough philosophical questions.
institutions would be better served forgoing an early investment in hardware and instead gravitating toward free online products like Unity, Organon and You by Sharecare, all of which allow users to create 3-D experiences from their desktop computers.
XR technologies encompassing 3D simulations, modeling, and production.
This project sought to identify
current innovative uses of these 3D technologies,
how these uses are currently impacting teaching and learning, and
what this information can tell us about possible future uses for these technologies in higher education.
p. 5 Extended reality (XR) technologies, which encompass virtual reality (VR) and augmented reality (AR), are already having a dramatic impact on pedagogy in higher education. XR is a general term that covers a wide range of technologies along a continuum, with the real world at one end and fully immersive simulations at the other.
p. 6The Campus of the Future project was an exploratory evaluation of 3D technologies for instruction and research in higher education: VR, AR, 3D scanning, and 3D printing. The project sought to identify interesting and novel uses of 3D technology
p. 7 HP would provide the hardware, and EDUCAUSE would provide the methodological expertise to conduct an evaluation research project investigating the potential uses of 3D technologies in higher education learning and research.
The institutions that participated in the Campus of the Future project were selected because they were already on the cutting edge of integrating 3D technology into pedagogy. These institutions were therefore not representative, nor were they intended to be representative, of the state of higher education in the United States. These institutions were selected precisely because they already had a set of use cases for 3D technology available for study
p. 9 At some institutions, the group participating in the project was an academic unit (e.g., the Newhouse School of Communications at Syracuse University; the Graduate School of Education at Harvard University). At these institutions, the 3D technology provided by HP was deployed for use more or less exclusively by students and faculty affiliated with the particular academic unit.
p. 10 definitions
there is not universal agreement on the definitions of these
terms or on the scope of these technologies. Also, all of these technologies
currently exist in an active marketplace and, as in many rapidly changing markets, there is a tendency for companies to invent neologisms around 3D technology.
A 3D scanner is not a single device but rather a combination of hardware and
software. There are generally two pieces of hardware: a laser scanner and a digital
camera. The laser scanner bounces laser beams off the surface of an object to
determine its shape and contours.
p. 11 definitions
Virtual reality means that the wearer is completely immersed in a computer
simulation. Several types of VR headsets are currently available, but all involve
a lightweight helmet with a display in front of the eyes (see figure 2). In some
cases, this display may simply be a smartphone (e.g., Google Cardboard); in other
cases, two displays—one for each eye—are integrated into the headset (e.g., HTC
Vive). Most commercially available VR rigs also include handheld controllers
that enable the user to interact with the simulation by moving the controllers
in space and clicking on finger triggers or buttons.
p. 12 definitions
Augmented reality provides an “overlay” of some type over the real world through
the use of a headset or even a smartphone.
In an active technology marketplace, there is a tendency for new terms to be
invented rapidly and for existing terms to be used loosely. This is currently
happening in the VR and AR market space. The HP VR rig and the HTC Vive
unit are marketed as being immersive, meaning that the user is fully immersed in
a simulation—virtual reality. Many currently available AR headsets, however, are
marketed not as AR but rather as MR (mixed reality). These MR headsets have a
display in front of the eyes as well as a pair of front-mounted cameras; they are
therefore capable of supporting both VR and AR functionality.
p. 13 Implementation
Technical difficulties.
Technical issues can generally be divided into two broad categories: hardware
problems and software problems. There is, of course, a common third category:
human error.
p. 15 the technology learning curve
The well-known diffusion of innovations theoretical framework articulates five
adopter categories: innovators, early adopters, early majority, late majority, and
laggards. Everett M. Rogers, Diffusion of Innovations, 5th ed. (New York: Simon and Schuster, 2003).
It is also likely that staff in the campus IT unit or center for teaching and learning already know who (at least some of) these individuals are, since such faculty members are likely to already have had contact with these campus units.
Students may of course also be innovators and early adopters, and in fact
several participating institutions found that some of the most creative uses of 3D technology arose from student projects
p. 30 Zeynep Tufekci, in her book Twitter and Tear Gas
definition: There is no necessary distinction between AR and VR; indeed, much research
on the subject is based on a conception of a “virtuality continuum” from entirely
real to entirely virtual, where AR lies somewhere between those ends of the
spectrum. Paul Milgram and Fumio Kishino, “A Taxonomy of Mixed Reality Visual Displays,” IEICE Transactions on Information Systems, vol. E77-D, no. 12 (1994); Steve Mann, “Through the Glass, Lightly,” IEEE Technology and Society Magazine 31, no. 3 (2012): 10–14.
For the future of 3D technology in higher education to be realized, that
technology must become as much a part of higher education as any technology:
the learning management system (LMS), the projector, the classroom. New
technologies and practices generally enter institutions of higher education as
initiatives. Several active learning classroom initiatives are currently under
way,36 for example, as well as a multi-institution open educational resources
(OER) degree initiative.37
p. 32 Storytelling
Some scholars have argued that all human communication
is based on storytelling;41 certainly advertisers have long recognized that
storytelling makes for effective persuasion,42 and a growing body of research
shows that narrative is effective for teaching even topics that are not generally
thought of as having a natural story, for example, in the sciences.43
p. 33 accessibility
The experience of Gallaudet University highlights one of the most important
areas for development in 3D technology: accessibility for users with disabilities.
p. 34 instructional design
For that to be the case, 3D technologies must be incorporated into the
instructional design process for building and redesigning courses. And for that
to be the case, it is necessary for faculty and instructional designers to be familiar
with the capabilities of 3D technologies. And for that to be the case, it may not be necessary but would certainly be helpful for instructional designers to collaborate closely with the staff in campus IT units who support and maintain this hardware.
Every institution of higher education has a slightly different organizational structure, of course, but these two campus units are often siloed. This siloing may lead to considerable friction in conducting the most basic organizational tasks, such as setting up meetings and apportioning responsibilities for shared tasks. Nevertheless, IT units and centers for teaching and learning are almost compelled to collaborate in order to support faculty who want to integrate 3D technology into their teaching. It is necessary to bring the instructional design expertise of a center for teaching and learning to bear on integrating 3D technology into an instructor’s teaching (My note: and where does this place SCSU?) Therefore, one of the most critical areas in which IT units and centers for teaching and learning can collaborate is in assisting instructors to develop this integration and to develop learning objects that use 3D technology. p. 35 For 3D technology to really gain traction in higher education, it will need to be easier for instructors to deploy without such a large support team.
p. 35 Sites such as Thingiverse, Sketchfab, and Google Poly are libraries of freely
available, user-created 3D models.
ClassVR is a tool that enables the simultaneous delivery of a simulation to
multiple headsets, though the simulation itself may still be single-user.
p. 37 data management:
An institutional repository is a collection of an institution’s intellectual output, often consisting of preprint journal articles and conference papers and the data sets behind them.49 An institutional repository is often maintained by either the library or a partnership between the library and the campus IT unit. An institutional repository therefore has the advantage of the long-term curatorial approach of librarianship combined with the systematic backup management of the IT unit. (My note: leaves me wonder where does this put SCSU)
Sharing data sets is critical for collaboration and increasingly the default for
scholarship. Data is as much a product of scholarship as publications, and there
is a growing sentiment among scholars that it should therefore be made public.50
Indiana University explores that question by bringing together tech partners and university leaders to share ideas on how to design classrooms that make better use of faculty and student time.
Untether instructors from the room’s podium, allowing them control from anywhere in the room;
Streamline the start of class, including biometric login to the room’s technology, behind-the-scenes routing of course content to room displays, control of lights and automatic attendance taking;
Offer whiteboards that can be captured, routed to different displays in the room and saved for future viewing and editing;
Provide small-group collaboration displays and the ability to easily route content to and from these displays; and
Deliver these features through a simple, user-friendly and reliable room/technology interface.
Key players from Crestron, Google, Sony, Steelcase and Spectrum met with Indiana University faculty, technologists and architects to generate new ideas related to current and emerging technologies. Activities included collaborative brainstorming focusing on these questions:
What else can we do to create the classroom of the future?
What current technology exists to solve these problems?
What could be developed that doesn’t yet exist?
What’s next?
top five findings:
Screenless and biometric technology will play an important role in the evolution of classrooms in higher education. We plan to research how voice activation and other Internet of Things technologies can streamline the process for faculty and students.
The entire classroom will become a space for student activity and brainstorming; walls, windows, desks and all activities are easily captured to the cloud, allowing conversations to continue outside of class or at the next class meeting.
Technology will be leveraged to include advance automation for a variety of tasks, so the faculty member is released from duties to focus on teaching.
The technology will become invisible to the process and enhance and customize the experience for the learner.
Virtual assistants could play an important role in providing students with a supported experience throughout their entire campus career.
In September 2015, the back-then library dean (they change every 2-3 years) requested a committee of librarians to meet and discuss the remodeling of Miller Center 2018. By that time the SCSU CIO was asserting the BYOx as a new policy for SCSU. BYOx in essence means the necessity for stronger (wider) WiFI pipe. Based on that assertion, I, Plamen Miltenoff, was insisting to shift the cost of hardware (computers, laptops) to infrastructure (more WiFi nods in the room and around it) and prepare for the upcoming IoT by learning to remodel our syllabi for mobile devices and use those (students) mobile devices, rather squander University money on hardware. At least one faculty member from the committee honestly admitted she has no idea about IoT and respectively the merit of my proposal. Thus, my proposal was completely disregarded by the self-nominated chair of the committee of librarians, who pushed for her idea to replace the desktops with a cart of laptops (a very 2010 idea, which by 2015 was already passe). As per Kelly (2018) (second article above), it is obvious the failure of her proposal to the dean to choose laptops over mobile devices, considering that faculty DO see mobile devices completely replacing desktops and laptops; that faculty DO not see document cameras and overhead projectors as a tool to stay.
Here are the notes from September 2015 https://blog.stcloudstate.edu/ims/2015/09/25/mc218-remodel/
As are result, my IoT proposal as now reflected in the Johnston (2018) (first article above), did not make it even formally to the dean, hence the necessity to make it available through the blog.
The SCSU library thinking regarding physical remodeling of classrooms is behind its times and that costs money for the university, if that room needs to be remodeled again to be with the contemporary times.
PROGRAM FEES $2,300 STARTS ON November 28, 20182 months, online
6-8 hours per week
A Digital Revolution Is Underway.
In a rapidly expanding digital marketplace, legacy companies without a clear digital transformation strategy are being left behind. How can we stay on top of rapid—and sometimes radical—change? How can we position our organizations to take advantage of new technologies? How can we track and combat the security threats facing all of us as we are swept forward into the future?
Who is this Program for?
Professionals in traditional companies poised to implement strategic change, as well as entrepreneurs seeking to harness the opportunities afforded by new technologies, will learn the fundamentals of digital transformation and secure the necessary tools to navigate their enterprise to a digital platform.
Participants come from a wide range of industries and include C-suite executives, business consultants, corporate attorneys, risk officers, marketing, R&D, and innovation enablers.
<h3 “>Your Learning Journey
This online program takes you through the fundamentals of digital technologies transforming our world today. Led by MIT faculty at the forefront of data science, participants will learn the history and application of transformative technologies such as blockchain, artificial intelligence, cloud computing, IoT, and cybersecurity as well as the implications of employing—or ignoring—digitalization.
Last year, the Durham University students’ union organized a debate on whether China was a threat to the West. Tom Harwood, then president of the union, said the school’s Chinese Students and Scholars Association complained about the topic and pressed him to drop one of the speakers, Anastasia Lin, a former Miss World Canada. Lin is also a human rights activist and a practitioner of Falun Gong, a spiritual meditation group banned by the Chinese government.
In March, the United Kingdom is scheduled to leave the European Union, a giant market of more than 500 million consumers. British officials are desperate to ink new free trade deals with major economies, including China. Harwood was stunned that a Chinese diplomat would suggest that the United Kingdom might pay a financial price for something as small as a college debate.
lash-forward to 2012 when then-British Prime Minister David Cameron met with the Dalai Lama in public in London. China’s economy was now more than three times the size of the United Kingdom’s. Beijing responded by canceling meetings and freezing out British officials. In 2015, Cameron refused to meet the Dalai Lama, who told The Spectator, a conservative political magazine, “Money, money, money. That’s what this is about. Where is morality?”
The Chinese government no longer just tries to punish the West for straying from the Communist Party line. In the past year, Chinese President Xi Jinping has gone further, arguing that China’s authoritarian system can serve as a model for others, an alternative to liberal democracy.
Clumsy attempts to censor people — as in the case of the Durham University debate — have backfired, but China has had success pressuring businesses, as the apologies by Marriott and Mercedes-Benz show.
+++++++++++++++
more on China in this IMS blog https://blog.stcloudstate.edu/ims?s=china
For the most part, twentieth-century politics was defined by economic issues. On the left, politics centered on workers, trade unions, social welfare programs, and redistributive policies. The right, by contrast, was primarily interested in reducing the size of government and promoting the private sector. Politics today, however, is defined less by economic or ideological concerns than by questions of identity. Now, in many democracies, the left focuses less on creating broad economic equality and more on promoting the interests of a wide variety of marginalized groups, such as ethnic minorities, immigrants and refugees, women, and lgbt people. The right, meanwhile, has redefined its core mission as the patriotic protection of traditional national identity, which is often explicitly connected to race, ethnicity,
or religion.
Again and again, groups have come to believe that their identities—whether national, religious, ethnic, sexual, gender, or otherwise—are not receiving adequate recognition. Identity politics is no longer a minor phenomenon, playing out only in the rarified confines of university campuses or providing a backdrop to low-stakes skirmishes in “culture wars” promoted by the mass media. Instead, identity politics has become a master concept that explains much of what is going on in global affairs.
Democratic societies are fracturing into segments based on ever-narrower identities,
threatening the possibility of deliberation and collective action by society as a whole. This is a road that leads only to state breakdown and, ultimately, failure. Unless such liberal democracies can work their way back to more universal understandings of human dignity,
they will doom themselves—and the world—to continuing conflict.
But in liberal democracies, equality under the law does not result in economic or social equality. Discrimination continues to exist against a wide variety of groups, and market economies produce large inequalities of outcome.
And the proportion of white working-class children growing up in single-parent families rose from 22 percent in 2000 to 36 percent in 2017.
Nationalists tell the disaffected that they have always been core members of a great
nation and that foreigners, immigrants, and elites have been conspiring to hold them down.
As Norwegian Refugee Council research found, 70 percent of Syrian refugees lack basic identification and documents showing ownership of property.
The global passport
Host nations certainly has a share in the damage, as they face problems concerning the accessibility of vital information about the newcomers — dealing with the undocumented refugee, the immigration service can’t gain the information about his/her health status, family ties or criminal record, or verify any other vital data that helps them make a decision. Needless to say, this may lead to the designation of refugee status being exploited by economic migrants, fugitives or even the war criminals that caused the mass displacement to begin with.
Another important issue is data security. Refugees’ personal identities are carefully re-established with the support of clever biometric systems set up by the U.N. Agency for Refugees (UNHCR). UNHCR registers millions of refugees and maintains those records in a database. But the evidence suggests that centralized systems like this could be prone to attacks. As a report on UNCHR’s site notes, Aadhaar — India’s massive biometric database and the largest national database of people in the world — has suffered serious breaches, and last year, allegations were made that access was for sale on the internet for as little as $8
Finland, a country with a population of 5.5 million, cannot boast huge numbers of refugees. For 2018, it set a quota of 750 people, mainly flying from Syria and the Democratic Republic of Congo. That’s way less than neighboring Sweden, which promised to take in 3,400. Nevertheless, the country sets a global example of the use of effective technology in immigration policy: It’s using blockchain to help the newcomers get on their feet faster.
The system, developed by the Helsinki-based startup MONI, maintains a full analogue of a bank account for every one of its participants.
Speaking at the World Economic Forum in Davos in January 2018, the billionaire investor and philanthropist George Soros revealed that his structures already use a blockchain in immigration policies
In 2017, Accenture and Microsoft Corp. teamed up to build a digital ID network using blockchain technology, as part of a U.N.-supported project to provide legal identification to 1.1 billion people worldwide with no official documents.
a Memorandum of Understanding (MOU) with blockchain platform IOTA to explore how the technology could increase efficiency.
“Social media is the future of customer service,” says Anna Yates, a content marketer for The Social Reach, a digital marketing agency. “Not only are consumers turning to social media more and more to learn about products and services, but new tools are available to make customer service faster, easier, and smarter.”
the three Ps — be patient, persistent, and polite. Companies tend to flip into “crisis” mode when you send angry messages that threaten lawsuits, bodily harm, or the end of civilization.
40 virtual reality headsets with haptic handsets for them to manipulate in the VR/AR space, and I connected them to content from New York Times VR and WITHIN. The content placed students in settings such as on the ground in a refugee crisis or in the midst of the Millions March in New York City.
At the beginning of every class, they would go into this virtual space and engage with the content instead of just reading it. They’d respond to me about what it was like to be immersed in the experience.
The content from the WITHIN app provided one of the more visceral experiences for students.
At the end of the course, for example, students met with a shark tank-type group—investors from the community, business, and industry folks—and pitched them business ideas that would utilize VR to provide a solution to problems that were local, regional, national or even global in scope.
Were you able to measure this success?
The way that I measured it was completion. How many of my students actually got through my class successfully? It was over 85%. My research from the two classes where I used VR and this approach shows students were engaged, and ultimately more successful in my classes.
Special thanks to Mark Gill, the SCSU Visual Lab Director for collaborating on the project and helping with shaping the chapter. Special thanks to Tom Hergert for in-depth proofreading.
Thanks to Cari Kenner, Kirstin Bratt and Vicky Williams for accommodating the testing of the VIdeo 360 library orientation.
